Name: Everest Vacuum
Address: DSM 225-227, Second Floor, DLF Tower, Shivaji Marg, Moti Nagar, New Delhi, Delhi, 110064
Telephone: +91-11-45457777

SEG

EAST

Mr. SANDEEP KUMAR ADHIKARY (REGIONAL HEAD - EAST)

+91-7082111404 sandeep.k@everestvacuum.com

WEST

Mr. PRASATH AMIRTHARAJ (REGIONAL HEAD - WEST)

+91-9582647218 prasath.a@everestvacuum.com

NORTH

Mr. UDIT ARORA (Deputy Manager - Sales)

+91-9811289881 udit.k@everestvacuum.com

SOUTH

Mr. N.VISWANATHAN (REGIONAL HEAD - SOUTH)

+91-9643400719 n.viswanathan@everestvacuum.com

NON SEG

EEG

Mr. SUKHJINDER SINGH (SENIOR MANAGER -EEG)

+91-9811604787 s.singh@everestvacuum.com

OEM/KAM

Mr. ABHINAV SHARMA (SALES MANAGER - KEY ACCOUNTS & OEM BUSINESS)

+91-9582600970 abhinav.s@everestvacuum.com

PROJECTS

Mr. PAVAN SINGH (Sales Manager- Projects)

+91-9582600221 pavan.s@everestvacuum.com

EXPORT

Mr. Satyam Kumar Alok (Senior Sales Manager - International Marketing)

+91-7082111413 satyam.k@everestvacuum.com

SPARE & SERVICE

RITESH

Mr. RITESH KUMAR (Manager- After Sales & Service)

+91-9215067613 ritesh.k@everestvacuum.com

TEAM LEADER

Mr. SANJAY SHARMA (VP - SALES AND BUSINESS DEVELOPMENT)

+91-7082422514 sanjay.s@everestvacuum.com

Mr. RAKESH AHUJA (AVP Sales- SEG)

+91-9582649594 rakesh.a@everestvacuum.com

DIRECTOR AND CEO

Mr. DHRUV MALHOTRA dhruv@everestvacuum.com

Everest Vacuum

(A brand of Everest Blower Systems Pvt. Ltd.)

Registered Office

B-44, Mayapuri Industrial Area,
Phase-1, New Delhi-110064, India

Tele: +91-11-45457777
enquiry@everestvacuum.com

Corporate Office

DSM 225-227, Second Floor,
DLF Tower Shivaji Marg, Moti Nagar,
Delhi, 110015, India

Tele: +91-9818742743
enquiry@everestvacuum.com

Manufacturing Unit

Plot No.6, Sector-16, HSIIDC,
Bahadurgarh-124507

Tele: +91-1276-297615, +91-1276-297616
enquiry@everestvacuum.com

Get In Touch

Call or submit our online form to request an estimate or for general questions about us and our products & services. We look forward to serving you!

VACUUM CALCULATOR

Choose Your Industry

UNIVERSAL GAS CONSTANT

g/mol

INLET TEMPERATURE OF VAPOURS INTO VACUUM PUMP

FOR >50 degree celsius- The vapours will enter into the vacuum pump/system after passing through condenser &Everest anticipates that there is sufficient Heat Transfer in the condenser/heat exchanger, thereby reducing the Inlet Vapour Temperature.

deg. Kelvin

BLANK-OFF VACUUM REQUIRED

(at closed suction)

Torr

VACUUM REQUIRED IN THE PROCESS

(under working condition) Everest wishes to inform you that in process of Distillation/ Drying, initially the Vapour Load is high & vacuum achieved is low & as the vapour load reduces the vacuum level keeps improving Finally coming down to Required High Vacuum Level.

Torr

SYSTEM VOLUME

This comprises of the Volume of the Reactor/ Distillation Column/ Dryer, Heat Exchagers/ Condensers, Receivers/ Traps & Process Piping upto the vacuum Pump/ Systems

Cubic Meter

NON-CONDENSABLE LOADS

The NC Loads means the Air Leakage Load in the entire process. This can be measured either by Pressure Rise Test for existing vessels OR by HEI Chart for New Installations.

kg/hr

MOLECULAR WEIGHT OF AIR

g/mol

CARRY OVER VAPOUR LOADS

These are defined by calculating loss of vapours from the Process. This is Basically the Vapour that gets carried over without getting condensed in the Process condenser. Can also be calculated by Loss of Vapours divided by the number of batch hours.

SOLVENT NAME :

kg/hr

MOLECULAR WEIGHT

g/mol

SOLVENT NAME :

kg/hr

MOLECULAR WEIGHT

g/mol

NUMBER OF PRE-CONDENSERS

Unit

UTILITY IN THE PRE-CONDENSERS

(Depending upon the Units filled above)

TYPE	IN TEMP.	OUT TEMP
PRIMARY
SECONDARY
TERTIARY

DISTANCE OF VACUUM SYSTEM FROM PROCESS CONDENSER

Meter

BATCH TIME

Hours

Everest vacuum system shall be supplied in the form of Skid Mounted, Ready to Run Unit with all required accessories in terms of : Electrical: Motors, VFD's, Switchgears, Relays, Logic, MCB, Electric Panel, Remote Pendant etc. Instrumentation: PLC, Solenoid, Temperature controllers. Vacuum Controllers, Gauges, SKADA/ DCS COntrolling etc. Hardware: Skid Structure, Interconnecting Piping, Bellows, Flanges, Coupling, Coupling Guards, Valves, Strainers, Filters, Condensers, Heat Exchangers etc. All speciefied components can be incorporated depending upon the customer requirement.